Rugged All Boy Additions Srapbooking Card

Rugged All Boy Additions Srapbooking Card

Ingredients:

Royal Blue Cardstock
Rugged All Boy Additions
Foam Squares
Corner Maker CA

How to Create:
Using Royal Blue Cardstock as the base, cut to 5-1/2″ x 8-1/2″. Use the Scoring Rotary Blade to score at 4-1/4″. The fold will be on the left side of the card.

Cut a Rugged All Boy Additions orange photo mat to to 4-1/2” x 4” and adhere to the right middle of the card.

Cut a strip of Rugged All Boy polka dots from patterned paper and layer is above the photo mat leaving a small strip of the card base showing between.

From patterned paper, cut out two rocket ships, one large, and one small and layer the small over the large one with foam squares.

Add Foam Squares to the back of the large rocket ship and adhere to the top right of the card on an angle.

Cut out a cloud shape from the patterned paper and adhere it to the card front slightly tucking under the end of the rocket to resemble steam.

Add a Rugged All Boy Additions title sticker to the bottom right side of the card.

Use the Corner Maker and round the top two corners of the card.

Finished Size: 4-1/4 x 5-1/2

Project Designed by: Laura Craigie

Cakes & Candles Let’s Party Birthday Card Project Idea

 

Ingredients:
Yellow Cardstock
Cakes & Candles 12×12 Additions
Ribbon Maker
Tape runner
Foam Squares

How to Create:

Cut Yellow Cardstock to 8-1/2″ x 5-1/2″. Fold in half.
Cut the Cakes and Candles Paper to 4-1/4″ x 5-1/2″. Adhere. Use the Corner Maker to round all four corners.

Cut five various paper mats to 3-1/2″. Roll and adhere. Adhere to the card. Add the Let’s Party sticker.

Using the Ribbon Maker, punch a orange photo mat. Use the negative for the fmales. Adhere with Foam Squares, doubling the Foam Squares on two flames.

Finished Size: 4-1/4″ x 5-1/2″

Project Designed by: Jill Klasen

Fabulous All Girl Additions Scrapbooking Card

 

Ingredients:
Taffy Cardstock
Fabulous All Girl Additions
Corner Maker
Scoring Rotary Blade
Tape Runner
Foam Squares

How to Create:
Using Taffy Cardstock as the base, cut to 5-1/2″ x 8-1/2″. Use the Scoring Rotary Blade to score at 4-1/4″. The fold will be on the left.

Cover the front of the card in pink butterfly patterned paper from Fabulous All Girl Additions.

Use the Corner Maker and round the two corners on the right side of the card.

Cut a blue photo mat to 4-1/2” x 3” and adhere to the middle left side of the card. Trim the other part of the photo mat to 4” x ¾” and adhere to the middle right of the card.

Add Foam Squares to the back of a title sticker cloud and adhere to the right side of the card.

Cut out a bunch of butterflies from pattern paper and adhere them to the card with Foam Squares.

Finished Size: 5-1/2″ x 4-1/4″

Project Designed by: Laura Craigie

Pink Shimmer and Shine Photo Album Accents Scrapbooking Card

 

Ingredients:
Pink Shimmer Cardstock
White Shimmer Cardstock
Shine Photo Album Accents
Shine Paper Embellishments
Shine Epoxy Stickers
Star Burst Pocket Punch
Corner Maker
Foam Squares

How to Create:
Using Pink Shimmer Cardstock as the base, cut to 5-1/2″ x 8-1/2″. Use the Scoring Rotary Blade to score at 4-1/4″. The fold will be on the left.

Cut a piece of White Shimmer Cardstock to 5” x 3” and adhere to the middle of the card front after rounding the corners with the Corner Maker.

Cut a circular Shine Paper Embellishment in half and adhere a piece to both the top and the bottom of the White Cardstock.

Adhere a floral shaped Shine Embellishment to the middle of the card.

Use Foam Squares to adhere a circular Shine embellishment to the floral center.

Add an Shine Epoxy Sticker to the middle of a title sticker before adhering it to the circle embellishment withFoam Square.

Use the Star Burst Pocket Punch 4 times with Pink Shimmer Cardstock and add Shine Epoxy Stickers to the center of the punch before adhering to the card in a row above and below the title sticker. UseFoam Squareon the two closest to the title.

Punch out 5 more star bursts with Pink Shimmer Cardstock again and cut them in half before adhering them to either side of the White Shimmer Cardstock.

Use the Corner Maker and round all the corner of the card.

Finished Size:

Project Designed by: Laura Craigie

Reminisce Accents Cricut Cartridge Friends Card

Ingredients:
Reminisce Accents Cricut Cartridge
Yellow Cardstock
White Cardstock
Green Apple Cardstock
Cheerful Designer-Print Paper
Cheerful Tone-on-Tone Paper
Foam Squares
Scoring Rotary Blade
Precision Point Adhesive

How to Create:
Use Yellow Cardstock as the base. Cut to 5-1/2″ x 11″. Use the Scoring Rotary Blade to score at 5-1/2″. Fold in half.

Adhere a 5-1/4″ x 5-1/4″ piece of green circle pattern paper to the front of the card.

Cut a 5″ doily from White Cardstock by pressing Doily1 key. Adhere to the middle of the card, using Precision Point Adhesive.

Cut two sets of leaves from Green Apple Cardstock, one at 2″ and the other at 3″, by pressing the Leaves key. Adhere to the card, as shown.

Cut a 3″ flower. Cut the first layer from Yellow Cardstock and by pressing the Shift and Flowr2-s keys. Adhere to the card.

Cut the next layer from red dotted paper by pressing the Flower2 key. Adhere on top of the yellow layer, using Foam Squares.

Cut the word “Friends” from the red dotted paper by setting the size to 1″ and pressing the Elegant Font and Scroll13 keys. Adhere to the card, as shown.

Finished Size: 5-1/2″ x 5-1/2″

Project Designed by: Jill Klasen

Reflections Scrapbooking Card Idea

 

Ingredients:
Reflections Designer Print Paper
Reflections Tone-on-Tone Paper
Reflections Storybox
White Shimmer Cardstock
Cheerful Tone-on-Tone Paper
Reminisce Tone-on-Tone Paper
Cheerful Title Stickers
Corner Rounder
CCS Circle Patterns
Foam Squares
All-Purpose Scissors

How to Create:

Cut a piece of White Shimmer Cardstock to 4-1/4″ x 11″. Fold in half.

Cut a piece of red dot Cheerful Tone-on-Tone Paper to 3-1/4″ x 4-3/4″. Cut a Reflections Storybox to 3″ x 4-1/2″. Adhere.

Cut a piece of purple writing pattern Reminisce Tone-on-Tone paper to 12″ x 1/2″. Adhere tape runner to the strip. Adhere the strip by gathering to form a ribbon.

Cut the following circles using the CCS Circle Patterns:
– red dotted Cheerful Tone-on-Tone paper using the blue blade on the inside of the large pattern
– light blue oval pattern Reflections Tone-on-Tone paper using the red blade on the inside of the medium pattern
– purple script pattern ReminisceTone-on-Tone paper using the green blade on the inside of the medium pattern
– light green oval pattern Reflections Tone-on-Tone paper using the blue blade on the inside of the medium pattern
– light blue with green inside (center of a flower) Reflections Designer Print paper using the blue blade on the inside of the small pattern

With each circle, fold in half and use the Corner Maker to punch the corners at the fold and open. Fold again in half the opposite direction and round corners again. Continue this step until you have the desired amount of petals. Repeat this for each circle, except the smallest. Adhere the circles together in the center. Curl up petals. Adhere the center with aFoam Square.

Fold two small pieces of green pattern Reflections Tone-on-Tone Paper. Using the All-Purpose Scissors, cut a half circle to creat a leaf. Adhere the leaves under the flower.

Adhere the Cheerful Clear Title Sticker as shown.

Finished Size:  4-1/4″ x 5-1/2″

Project Designed by: Jill Klasen

Cheerful Valentine Addition Card Idea

 

Ingredients:
Cheerful Valentine Addition
White Cardstock
Creative Cuts Tool
Creative Cuts Love Pattern
Corner Maker
Scoring Rotary Blade

How to Create:
Using White Cardstock as the base, cut to 5-1/2″ x 11″. Use the Scoring Rotary Blade to score at 5-1/2″.

Fold card and use the Corner Maker to round all four corners.

Adhere a 4-1/2″ x 4-3/4″ piece of silver photo mat centered and flush with the top edge.

Apply the birds sticker approx. 3/4″ from the top edge. Adhere a pink heart sticker above the birds, using a foam square.

Apply the “Truly Madly Deeply” sticker.

Using the Creative Cuts Tool and Love Pattern, cut four hearts each from red, pink and love pattern paper. Fold each heart in half (so the top is folded in). Adhere the back right side of one half of a heart to the back left side of another heart. Do this two more times with the same pattern of paper. Continue this method for the other two patterns. Adhere the hearts across the bottom of the card, as shown.

Finished Size: 5-1/2″ x 5-1/2″

Project Designed by: Cindy Liebel

I heart you! Valentine Card

 

Ingredients:
Cheerful Valentine Additions
White Ruled Paper
White Cardstock
Sweet Heart Maker
Scoring Rotary Blade
Corner Maker
Foam Squares

How to Create:

Cut a piece of White Cardstock to 5-1/2″ x 8-1/2″. Score at 4-1/4″ and fold in half.
Cut a piece of White Ruled Paper to 5-1/2″ x 4-1/4″. Adhere to the front of the card and round all corners.

Using the Sweet Heart Maker, punch out three hearts from the pink heart patterned paper. Cut out three hearts of the red XOXO paper.

Adhere the three pink heart as shown. Adhere using red hearts using Foam Squares as shown.

Add the i {heart} you! clear title sticker to the bottom-center as shown.

Finished Size:
5-1/2 x 4-1/4″

Project Designed by: Creative Memories

Vday Card


Ingredients (Canadian)

Cloud 12×12 Cardstock
Red 12×12 Cardstock
Fabulous Storybox
Classic Valentine Stickers
Straight Blade
Scoring Rotary Blade
Creative Cuts Love Pattern
Lovable Mini Pocket Punches
Doodling Templates Flowers and Swirls
Black Dual-Tip Pen
Red Dual-Tip Pen
Pink Dual-Tip Pen

Green Dual-Tip Pen
Tape Runner

How make it:

  1. Cut Cloud Cardboard using rotation straight blade to make and 8×8 square, using rotating Scoring blade fold to make a 4×8 card.
  2. Cut heart from Creative Cut Love Pattern in red Cardboard using tape runner glue 2 pieces for heart on to card.
  3. Using Doodling templates Flowers and Swirls and Dual-tip Pens create flower or other doodle (remember make it fun make it yours)
  4. Add stickers
  5. Using Fabulous Storybook paper cut heart with Lovable Mini pocket punch, use tape runner to glue.
  6. Use Dual-tip Pens to journal what you desired (Joyeuse St-Valentin / Happy Valentine Day)
Feel free to visit my Quote section to fill in your beautiful creation. Happy Scraping!!


Lovable Circle Pattern Valentines Card

 

Ingredients:
Lovable 8″ x 8″ Kit
Cloud Cardstock
Brown Cardstock
Cranberry Cardstock
CCS Circle Patterns
Lovable Mini Pocket Punches
Scoring Rotary Blade
Foam Squares

How to Create:
Using the Medium Circle Pattern (outside of template) and the Blue Blade, cut (2) circles from Cloud Cardstock.

Using the Scoring Rotary Blade, score one circle 1″ in from the edge. Fold at score line.

Apply adhesive on the 1″ scored portion only. Line up and adhere the blue circles together, with bigger scored portion bending out away from the card.

Using theMedium Circle(outside of template) and the Red Blade, cut a circle from the pink pattern paper. Adhere to the front, center of the card (the front will be the circle not scored).

Using the Small Circle Pattern (outside of template) and the Red Blade cut a circle from the red pattern paper. Adhere to the center of the pink paper. Use the same pattern to cut a second circle from Brown Cardstock.

Use the Lovable Mini Heart Pocket Punch to punch hearts all around the brown circle, spacing evenly. Adhere to the center of the red circle.

Cut one more pink circle using the Medium Circle Template (inside of template) and the Blue Blade. Adhere to the center of the brown circle.

Cut a 2-1/2″ x 1″ strip of Cloud Cardstock. Using an All-Purpose Scissors, make a v-shape cut on one end.

Apply the “So in Love” sticker and adhere to the card, using Foam Squares.

Using the Lovable Scalloped Heart Mini Punch, punch 3 hearts from Cranberry Cardstock. Adhere to the card.

Using a Fine-tip Cocoa Pen, doodle around the edges, as shown.

Finished Size: 5-1/2″ Diameter

Project Designed by: Melissa Ullmann

Previous Older Entries Next Newer Entries

Follow

Get every new post delivered to your Inbox.

Join 486 other followers

%d bloggers like this: